DXSM106 Medium Wall Pack

Wall Packs/Medium Wall Packs/DXSM106 Medium Wall Pack
Mule Lighting - Wall Packs - Medium Wall Packs -DXSM106

FIND A SALES REPRESENTATIVE

To find your local product representative in the United States, enter your zip code and press the Search button.

DXSM106 Medium Wall Pack  

The DXSM106 Series is a durable, medium wallpack that is ideal for parking areas, entrances, walkways, underpasses, loading docks, and recreation areas. Available with Metal Halide, Pulse Start Metal Halide or High Pressure Sodium lamps from 26w to 150w.

CONSTRUCTION
The DXSM106 Series features a durable, die-cast aluminum enclosure with an architectural bronze powder coated finish. enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. enclosure and hardware are corrosion resistant. The DXSM106 features an internal, anodized aluminum reflector which provides ideal light
distribution, and the lamp(s) are protected by a high-impact, heat resistant borosilicate glass refractor. 

 LAMPS & BALLASTS

Compact Fluorescent: 4-pin Triple Tube lamps from 26 to 42 watts, utilizing a GX24-q3 base with an electronic programmed start ballast rated for a minimum operating temperature of -20oc (-4of) and 120/277Vac input. 

High Pressure Sodium: B17 type lamps 35 to 150 watts, utilizing a medium base, glazed porcelain socket pulse rated for 4kV with an R-nPF, HX-HPF or cWA ballast rated for a minimum operating temperature of -30Oc (-22OF) and 120VAc, Double-tap (120/277VAc) or Multi-tap (120/208/240/277VAc) input. 

Metal Halide: BD17 type lamps 50 to 100 watts, utilizing a medium base, glazed porcelain socket pulse rated for 4kV with an HX-HPF ballast rated for a minimum operating temperature of -30Oc (-22OF) and Double-tap (120/277VAc) or Multitap (120/208/240/277VAc) input.

Pulse Start Metal Halide: BD17 type lamps 50 to 100 watts, utilizing a medium base, glazed porcelain socket pulse rated for 4kV with a cWA ballast rated for a minimum operating temperature of -30Oc (-22OF) and Multi-tap (120/208/240/277VAc) input.
 

Induction: The Tl106-Ind utilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minumum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F). 40W electronic ballast draws 45 watts, 0.38 amps at 120V, 0.17 amps at 277V.

SPECIFICATION SHEETS


 
Copyright 2017 DYNalux® | All Rights Reserved | 800-556-7690 Terms of Use | Site Map
DYNalux®     46 Baker Street, Providence, RI 02905    Phone: (800) 556-7690    Fax: (401) 941-2929